Tail Light Rear Running Brake Lights Pre-cut Overlay Tint for 2021-2025 Lexus is300 is350 is500

Upgrade your 2021-2025 Lexus IS300, IS350, or IS500 with these precisely cut Tail Light and Running Brake Light Overlay Tints. Offered in Dark Smoke and Light Smoke finishes, they provide a sharp, assertive aesthetic without compromising elegance. Engineered for straightforward peel-and-stick application, these overlays ensure a seamless, distinctive look that enhances your vehicle’s style effortlessly. Astheically pleasing tints that show your bold statement without compromising the functionality of the brake lights.

Specifications:

• Fitment: For 2021, 2022, 2023, 2024 2025 Lexus IS300, IS350, IS500, 350 F-sport, and IS500 F-sport models Rear Tail light Running Brake Lights Pre-cut Overlay Tint in Smoked and Light Smoked.
• High-Quality Material: Can withstand all kinds of weather (5 - 7 Year Durability)
• Made with Durable High Gloss Material with Nano Air-Release
• Easy Application (Peel and Stick) - in 4 PCS FOR EASIER INSTALLATION
• Comes in (4 PCS) in a Pair (left and Right tail light brake light tint smoked out)
• ** NOTE ** Not Actual Tail Light brake light replacements. This product is an overlay that covers the existing rear tail light brake running lights with a vinyl tint.

How to Install

For Best Results

Tools: Heat Gun or Blow Dryer / Padded Glove or Felt Tip Squeegee

1. Rinse / Soap your Rear Tail Light, Brake / Running Brake lights to get rid of debris before application
2. Peel off one side of the tail light tint at a time.
3. Note: If you mess up placement, peel off the overlay with ease. DO NOT heat up the overlay until the desired placement has been met.
4. Starting with the brake lights (outer lighting on the fender).
   1. Align the top portion that sits closest to the top of the tail light and as you tack it down, align the outer edge that faces away from the middle of the car.
   2. Once aligned, the rest should fall into place - push out any bubbles to the closest edge.
   3. Adjust placement if needed
   4. NOTE - Make sure all red is covered on each side - depending on how you semi-stretch the overlay, it may go into the grooves between the trunk 
   5. If there is overage - make sure to heat that part with a heat gun / blow dryer and fold it into the groove (heat to a hot but not scalding temp to the touch)
   6. REPEAT same steps for Passenger side TL or the Driver Side TL, depending on which one you started first.
5. Starting with the Running Brake Lights,
   1. align the outer edge ( edge that faces away from the middle of bumper and in the groove of the trunk)
   2. Once aligned, use a free hand to hold / guide the overlay onto the running brake light.
   3. Adjust placement as needed
   4. NOTE - Make sure all red is covered on the top and bottom of the running brake light as you lay with your other hand that is NOT guiding the overlay. 
   5. Repeat the same steps for to other piece that fits on the running brake lights.
   6. NOTE - if you start from outer edge and meet in the middle, depending on how you lay and stretch the overlay it will overlap. However, it may be minimal overlapping and will not be too visible.
   7. If you do not like the overlapping, you can cut it with a scissor or blade.
6. Once the placement is met, PLEASE FOLLOW THE BELOW INSTRUCTIONS FOR ADHESION
7. If you have a blow dryer or heat gun, use it to get rid of any tiny bubbles and improve adhesion
8. If there are bubbles, make sure you press firmly with your finger and swipe it toward the closest edge
9. If you mess up, you can peel it off right away with no hassle, and add some heat to get rid of the wrinkles.
10. ** REMEMBER TO POST-HEAT** the vinyl after laying, this will activate the glue behind the overlay which will enhance tackiness.
11. NOTE:  Light Smoke has PET liner, which must be peeled off after install for a complete super gloss finish. Dark Smoke may sometimes come with PET LINER. if you are not sure PLEASE REACH OUT TO US AND ASK.