Pinstripe WRX Logo Dashboard Overlay for Subaru WRX 2022+

This Pinstripe WRX Logo Dashboard Overlay is a stylish interior automotive add-on for Subaru WRX 2022+ with a distinctive pin-stripe WRX logo. Made of a durable vinyl, this overlay is designed to be easy to install, and can offer a range of aesthetic options for customizing your vehicle interior.

2022+ Subaru WRX (VB) Logo Dash Pinstripe

• Fitment : [ 2022-2024 WRX ]
• Passenger side dashboard of 2022+ WRX VB
• High-Quality durable material. 5-year durability 
• Easy to apply and install.
• Perfect fitment guaranteed.
• Available in many colors.

How to Install

For Best Results

Tools: Heat Gun or Blow Dyer / Padded Glove or Felt Tip Squeegee

1. Rinse / Soap the dashboard and wait for it to try.
2. Lay the ( WRX --- ) Logo first.
3. To make the laying of the pinstripe easier, add a painter's and align that painter's tape with the already laid ( WRX ---). 
   
4. Make sure the top of the painter's tape is horizontal with the ( --- ) that is already laid on AND it goes all the way to the end of where the pinstripe is supposed to end.
5. Once desired placement has been met, peel the long pinstripe off and align the horizontal bottom of the pinstripe with the top of the painter's tape. 
6. Keep laying it down while holding one end until the entire pinstripe is laid flat.
7. Padded card is not required, the use of a finger will work perfectly. As it will allow you to move the stripe the way you want it.
8. If using your fingers, start from one side of the stripe and use your finger to lay it down as you pull with your other hand to guide the way of how the stripe will be placed onto the side dashboard.
9. If you have a blow dryer or heat gun, use it to get rid of any tiny bubbles and improve adhesion
10. If there are bubbles make sure you press firmly with your finger and swipe it toward the closest edge
11. If you mess up, you can peel it off right away with no hassle, and add some heat to get rid of the wrinkles.