Headlight Eye-lid and Amber Delete Black Out Pre-cut Overlay for 2022+ Honda Civic

Headlight Eye-lid and Amber Delete Black Out Pre-cut Overlay for 2022+ Honda Civic
Enhance your vehicle with our 2022+ Honda Civic Headlight Eye-lid and Amber Delete Black Out Pre-cut Overlay. Create a bold appearance while eliminating unnecessary chrome and amber, highlighting the DRL, and setting your car apart from the competition.

Specifications:

• Fitment: For 2022+ Honda Civic Hatchback / Honda Civic Sedan / Honda Civic Type-R FL5 Headlight Eye-lid and Amber Delete
• High-Quality Material: Can withstand all kinds of weather (5 - 7 Year Durability)
• Made with Durable High Gloss Material with Nano Air-Release
• Easy Application (Peel and Stick)
• Comes in (4 PCS) in a Pair (left and Right Black Out)
• 2 pcs of Headlight Eye-lid Black Out
• 2 pcs of Amber Delete
• ** NOTE ** Not Actual Head Light Amber / Daytime Running Light Replacement, This product is an overlay that covers and sticks onto the existing Amber on the Headlight and onto the Daytime Running Lights

How to Install Headlight Eye-lid / Amber for 2022+ Honda Civic 

For Best Results

Tools: Heat Gun or Blow Dyer / Padded Glove or Felt Tip Squeegee

1. Rinse / Soap your headlight to get rid of debris prior to application
2. Dry your headlights to ensure that there is no dust specs on the surface of the headlights as these overlays are DRY INSTALL.
3. The first step is to Install the Amber deletes:
   • Note: if you mess up placement, peel off the overlay with ease. Wait to heat up the overlay until the desired placement has been met.
   • Align the top of the overlay just below the silver led bar.
   • The front of the Amber delete that faces the "Headlight Bulb" should sit just behind the silver trim inside the headlight
   • Lay the overlay  slowly from the top of the overlay and move downward in a horizontal fashion, this .
   • Lift the overlay as needed to push out the wrinkles until it sits flush against the headlight amber.
   • Next follow step 5 BELOW
     
4. Second step is to Install the Daytime Running Light Eye-lid:
   
   • Note: if you mess up placement, peel off the overlay with ease. Wait to heat up the overlay until the desired placement has been met.
   • Align DRL at the pointy edge where the headlight meets the middle of the bumper.
   • The bottom of the overlay should sit just above the LED turn signal covering the DRL silver surround.
   • Use your free hand to guide the overlay as the other hand adjusts and lays the overlay onto the DRL.
   • Lift as needed to get the desired placement and push out any bubbles as you lay or lift and relay till the bubbles are gone. 
   • Once you get to the outer curve where the amber delete sits, try and align the bottom portion of the overlay just above the TOP of the Amber delete
   • Depending on how you install the overlay, it may sit above slightly or slightly covering the amber delete.
   • TAKE your time and adjust, as this material is forgiving. Lift and adjust to  your desired placement is met.
     
   
   
5. Once placement is met, PLEASE FOLLOW BELOW INSTRUCTIONS FOR ADHESION.
6. If you have a blow dryer or heat gun, use it to get rid of any tiny bubbles and          improve adhesion.
7. If there are bubbles make sure you press firmly with your finger and swipe it          toward the closest edge.
8.  If you mess up, you can peel it off right away with no hassle, and add some heat   to get rid of the wrinkles.
9. ** REMEMBER TO POST-HEAT** the vinyl after laying, this will activate the glue behind the overlay which will enhance tackiness.
10. NOTE: Smoked and Light Smoke have PET liner, must be peeled off after install for a complete super gloss finish.