AFDOverlays Intake Cover Logo Pre-cut Overlay compatible with 2023-2026 Integra Type-S

Transform the Intake shield cover engine mount logo on your 2023-2026 Acura Integra Type-S with our precision-cut overlay tint, specially crafted to fit the lettering beneath your hood. Choose from a wide range of colors to give your vehicle a bold, stylish upgrade that stands out. Designed for a flawless fit around on the letters of the intake, this high-quality overlay delivers a professional finish that instantly elevates your Integra’s engine bay. Ideal for enthusiasts who want to add a sharp, commanding presence to their ride with a sleek and confident flair when showcasing 'whats under the hood.'

Specifications:

• Fitment: For 2022 2023 2024 2025 2026 Acura Integra Type-S 
• High-Quality Material: Can withstand all kinds of weather (5 - 7 Year Durability)
  
• Easy Application (Peel and Stick)
• Comes in (2 Pieces) 1 for practice and one for final install
• 2 pieces of AFDOverlays Logo Pre-cut Overlay
• ** NOTE ** Not Actual intake logo replacement. This product is an overlay that covers and sticks onto the logo/lettering on the intake.

How to Install:
For Best Results
Tools: Heat Gun or Blow Dyer / Padded Glove or Felt Tip Squeegee

1. Rinse / Soap your engine intake letters to get rid of debris before application.
2. Dry the surface to ensure that there is no dust/debris specs on the surface of the letters and crevices, as these overlays are DRY INSTALL. 
   
3. Peel off Type-S overlay off the backing.
4. Align the T first and guide the rest of the lettering onto the rest of the letters. Working and laying down the letters till you get to the S.
5. Once aligned, the rest should fall into place. If it does not align perfectly adjust as you see till desired placement is met.
6. Make sure all the flat surface is mostly covered as these overlays should stick on the flat part of the letters that face upward.
7. Once placement is met, PLEASE FOLLOW INSTRUCTIONS BELOW FOR ADHESION.
8. Use your finger and press / glide over the logo firmly to ensure the vinyl is stuck on to the logo PRIOR to peeling off the transfer tape.
9. In the event, the transfer tape lifts the vinyl, lay the vinyl back down and press/firmly glide over the logo with your finger and the transfer tape should peel off. If this method does not work, peel up the transfer tape slowly and hold down the letter with your finger and the transfer tape will come off.
10. Once the transfer tape is peeled off - If you have a blow dryer or heat gun, use it to get rid of any tiny bubbles and improve adhesion.
11. If there are bubbles, make sure you press firmly with your finger and swipe it toward the closest edge.
12.  If you mess up, you can peel it off right away with no hassle, and add some heat to get rid of the wrinkles.
13. ** REMEMBER TO POST-HEAT** the vinyl after laying, this will activate the glue behind the overlay which will enhance tackiness. 
    NOTE: If you have any questions - please ask customer service by emailing us at sales@aeroflowdynamicsoverlays.com