2024+ Subaru Crosstrek Rear Bumper Reflector Pre-Cut Overlay Smoked

Upgrade the appearance of your 2024+ Subaru Crosstrek with our Rear Bumper Reflector Pre-Cut Overlay in Smoked or Light Smoked. Transform the reflector from a plain red to a sleek and unique addition. Give your vehicle an aggressive look and take out the red while keeping a JDM tone and feel.

• Fitment: For 2024 Subaru Crosstrek Rear Bumper Reflect or Overlay Smoke Out
• High-Quality Material: Can withstand all kinds of weather (5 - 7 Year Durability)
• Smoked Tint Vinyl Sticker, Changes Rear of Vehicle to Look More Aggressive 
• Easy Application
• Comes in Pair (Driver Side and Passanger Side Rear SMOKE OUT)
• ** NOTE ** Not Actual Reflector Replacement, This product is an overlay that covers the existing Reflector.

How to Install Tail Light Reverse/Turn/Brake signal overlay

For Best Results

Tools: Heat Gun or Blow Dyer / Padded Glove or Felt Tip Squeegee

1. Rinse / Soap your Reflector to get rid of debris before application
2. Peel off the Reflector Tint Overlay
3. Align the Overlay from the Inside of the reflector where the point is pointing upward towards the roof of the car.
4. Adjust the overlay till it covers the edges of the reflector on both the right and left side of the reflector. 
5. If using your fingers, start from the pointy edge of the overlay working your way towards the middle of the bumper or vice versa. Swipe left and right gradually to reduce bubbles
6. Depending on how you place the overlay, there may be some excess, fold it into the crevice between the bumper trim and reflector.
7. Once the desired placement is met, squeegee out the water if installing by water.
8. If not installed by water, just push the bubbles to the closest edge until the bubble disappears.
9. If you have a blow dryer or heat gun, use it to get rid of any tiny bubbles and improve adhesion
10. If there are bubbles make sure you press firmly with your finger and swipe it toward the closest edge
11. If you mess up, you can peel it off right away with no hassle, and add some (just enough till the wrinkles disappear) heat to get rid of the wrinkles.
12. For Best application, use water underneath for and squeegee out the water once the desired placement is met.