2023+ Toyota Prius Tail Light Turn Signal Pre-Cut Overlay SMOKED

• Fitment: For 2023+ Toyota Prius Turn Signal Overlay in Smoked, Light Smoked, or JDM Yellow Finish
• High-Quality Material: Can withstand all kinds of weather (5 - 7 Year Durability)
• Tint Vinyl Sticker, Changes the front of the vehicle 
• Easy Application with Air-Release Tint (Water Not Needed to Install)
• Comes in Pair (left and Right SMOKE OUT or JDM YELLOW)
• ** NOTE ** Not Actual Turn Signal Replacement, This product is an overlay that covers the existing Turn Signal.

How to Install

For Best Results

Tools: Heat Gun or Blow Dyer / Padded Glove or Felt Tip Squeegee

1. Rinse / Soap your Turn Signal to get rid of debris prior to application
2. Peel off Turn Signal Tint Overlay
3. Align the Overlay starting from the edge that is facing towards the outside of the tail light.
4. Make sure you have a padded card or soft glove to put on your fingers to begin applying the overlay on the reflector. If not, your fingers will work.
5. If using your fingers, start from the edge closest to the outside of the turn signal away from the middle of the rear bumper. Swipe left and right or up and down to gradually reduce bubbles
6. If you have a blow dryer or heat gun, use it to get rid of any tiny bubbles and improve adhesion
7. If there are bubbles make sure you press firmly with your finger and swipe it toward the closest edge
8. If you mess up, you can peel it off right away with no hassle, and add some heat to get rid of the wrinkles.
9. Once laid and post-heated, peel off the protective plastic sheet (only on Black OUTS or Smoked Out) on top of the tint .