2023+ Toyota Prius Rear Bumper Side Reflector Pre-Cut Overlay Smoked or Blackout

• Fitment: For 2023+ Toyota Prius (XLE, LE, LIMITED) Rear Bumper Reflector Overlay in Smoked, Light Smoked, or Blackout Finish
• High-Quality Material: Can withstand all kinds of weather (5 - 7 Year Durability)
• Smoked Tint Vinyl Sticker, Changes Rear of Vehicle to Look More Aggressive 
• Easy Application with Air-Release Tint (Water Not Needed to Install)
• Comes in Pair (left and Right SMOKE OUT or BLACK OUT)
• ** NOTE ** Not Actual Reflector Replacement, This product is an overlay that covers the existing Rear Bumper Side Reflector 

How to Install

For Best Results

Tools: Heat Gun or Blow Dyer / Padded Glove or Felt Tip Squeegee

1. Rinse / Soap your reflector get rid of debris prior to application
2. Peel off Reflector Tint Overlay
3. Align the Overlay from pointy part that faces towards the wheel and work your way down the bumper. Use your other hand to guide where to place while the other hand lays it down.
1. You may use soap / water underneath overlay, but not required.
2. Only use water method if backing is ORACLE, if it 3M, DO NOT USE WATER METHOD.
4. Make sure you have a padded card or soft glove to put on your fingers to begin applying the overlay on the reflector. If not, your fingers will work
5. If using your fingers, start from the pointy edge of the overlay working your way towards the bottom of the reflector. Swipe left and right or up and down to gradually to reduce bubbles
6. If you have a blow dryer or heat gun, use it to get rid of any tiny bubbles and improve adhesion
7. If there are bubbles make sure you press firmly with your finger and swipe it towards the closest edge
8. If you mess up, you can peel it off right away with no hassle, and add some heat to get rid of the wrinkles.
9. Once laid and post-heated, peel off the protective plastic sheet (only on Black OUTS) on top of the tint .