2023+ Toyota Prius Fog Light Pre-Cut Overlay

• Fitment: For 2023+ Toyota Prius (XLE, LE, LIMITED) FogLight Overlay in Smoked, Light Smoked, or JDM Yellow Finish
• High-Quality Material: Can withstand all kinds of weather (5 - 7 Year Durability)
• Tint Vinyl Sticker, Changes the front of the vehicle 
• Easy Application with Air-Release Tint (Water Not Needed to Install)
• Comes in Pair (left and Right SMOKE OUT or JDM YELLOW)
• ** NOTE ** Not Actual Reflector Replacement, This product is an overlay that covers the existing Foglight.

How to Install

For Best Results

Tools: Heat Gun or Blow Dyer / Padded Glove or Felt Tip Squeegee

1. Rinse / Soap your Fog Light get rid of debris prior to application
2. Peel off Reflector Tint Overlay
3. Align the Overlay starting from the edge that is facing towards the MIDDLE of the bumper.
4. Make sure you have a padded card or soft glove to put on your fingers to begin applying the overlay on the reflector. If not, your fingers will work.
5. If using your fingers, start from the edge closest to the middle of the front bumper by working your way toward the outside of the bumper. Swipe left and right or up and down to gradually reduce bubbles
6. If you have a blow dryer or heat gun, use it to get rid of any tiny bubbles and improve adhesion
7. If there are bubbles make sure you press firmly with your finger and swipe it towards the closest edge
8. If you mess up, you can peel it off right away with no hassle, and add some heat to get rid of the wrinkles.
9. Once laid and post-heated, peel off the protective plastic sheet (only on Black OUTS) on top of the tint .