2023+ Honda Accord Headlight Amber Delete Pre-Cut Overlay SMOKE BLACK OUT

 The 2023+ Honda Accord Headlight Amber Delete Pre-Cut Overlay helps you blur the lines between the cars body and the headlight. Choose between the smoke or black out options for an aggressive yet subtle and uniform look. Perfect for giving your Honda Accord a unique style.

• Fitment: For 2023+ Honda Accord Headlight Amber Delete only in ( Smoke. Light Smoke or Black Out)
• High Quality Material: Can withstand all kinds of weather (5 - 7 Year Durability)
• Nano-air release technology can apply with dry method with ease.
  
• Easy Application
• Comes in Pair (left and Right BLACK OUT)
• ** NOTE ** Not Actual Headlight Replacement, This product is an overlay that covers the existing AMBER MARKER of HEADLIGHT. 

How to Install

For Best Results

Tools: Heat Gun or Blow Dyer / Padded Glove or Felt Tip Squeegee

1. Rinse / Soap your Headlight to get rid of debris prior to application
2. Peel off Amber Delete Overlay
3. Align the curve where the Black portion of the amber delete ends (edge away from fender). 
4. Make sure you do not lay everything on as you need to start with the bottom portion of the headlight where it curves from top to bottom. Once the amber portion delete is laid on. You'll have more room to wiggle with the top portion of the headlight that wraps over the bump on the headlight.
5. Make sure you have a padded card or soft glove to put on your fingers to begin applying the overlay on the light. If not, your fingers will work
6. If using your fingers, start from the pointy edges of the overlay working your way towards the middle of the overlay or vice versa. Swipe left and right gradually to reduce bubbles
7. If you have a blow dryer or heat gun, use it to get rid of any tiny bubbles and improve adhesion
8. If there are bubbles make sure you press firmly with your finger and swipe it towards the closest edge
9. If you mess up, you can peel it off right away with no hassle, and add some heat to get rid of the wrinkles.
10. Post heat with heat gun or blow dryer for increased stickyness / tackiness to prevent lifting or peeling.