2022+ Toyota GR86 Reverse Light Pre-Cut Overlay Smoked

• Fitment: For 2022+ Toyota GR86 Reverse Light Smoke Out, Ligh Smoke, Red Out
• High-Quality Material: Can withstand all kinds of weather (5 - 7 Year Durability)
• Smoked Tint Vinyl Sticker, Changes Rear of the Vehicle to Look More Aggressive 
• Easy Application with air-release technology - Air-Release Tint (Water Not Needed to Install)
• Comes in Pairs (left and Right SMOKE OUT/LIGHT SMOKE/RED OUT)
• ** NOTE ** Not Actual REVERSE Light Replacement, This product is an overlay that covers the existing reverse light

How to Install

For Best Results

Tools: Heat Gun or Blow Dyer / Padded Glove or Felt Tip Squeegee

1. Rinse / Soap your Tail Light to get rid of debris prior to application
2. Remove the reverse light housing by using a flat head screw driver and popping off the 3 OEM self-tap clips on the underside of the diffuser.
3. Remember to clean the reverse light thoroughly prior to the application of the overlay.
4. Align the overlay at one edge of the reverse light and lay the rest down slowly while you smooth it onto the surface from one side to the other.
   
5. Make sure you have a padded card or soft glove to put on your fingers to begin applying the overlay on the light. If not, your fingers will work
6. Swipe left and right gradually to reduce bubbles
7. If you have a blow dryer or heat gun, use it to get rid of any tiny bubbles and improve adhesion
8. If there are bubbles make sure you press firmly with your finger and swipe it toward the closest edge
9. If you mess up, you can peel it off right away with no hassle, and add some heat to get rid of the wrinkles.
10. Once laid and post-heated, peel off the protective plastic sheet on top of the tint (smoke or light smoke).