2022+ Subaru WRX Smoked Tail Light Turn Signal and Reverse Pre-Cut Overlay

• Fitment: For 2022+ Subaru WRX Tail Light Turn Signal Reverse Overlay Smoke Out
• High-Quality Material: Can withstand all kinds of weather (5 - 7 Year Durability)
• Smoked Tint Vinyl Sticker, Changes Rear of Vehicle to Look More Aggressive 
• Easy Application
• Comes in Pair (left and Right SMOKE OUT)
• ** NOTE ** Not Actual Reflector Replacement, This product is an overlay that covers the existing reflector

How to Install Tail Light Reverse/Turn signal overlauy

For Best Results

Tools: Heat Gun or Blow Dyer / Padded Glove or Felt Tip Squeegee

1. Rinse / Soap your Tail-Light to get rid of debris prior to application
2. Peel off Tail-Light Tint Overlay
3. Align the Overlay from the Inside of the Tail-light and work your way to the middle of the bumper
4. Make sure you have a padded card or soft glove to put on your fingers to begin applying the overlay on the light. If not, your fingers will work.
5. Alight the Edge of the taillight overlay onto the edge that is closest to the middle of the trunk. The edge that looks like \   or   / depending on what side of the tail light you are working with.
6. However you may alight the tail-light from the rounded corner first if you prefer to lay it on from outer to inner.
7. If using your fingers, start from the pointy edge of the overlay working your way towards the middle of the bumper or vice versa. Swipe left and right gradually to reduce bubbles
8. If you have a blow dryer or heat gun, use it to get rid of any tiny bubbles and improve adhesion
9. If there are bubbles make sure you press firmly with your finger and swipe it towards the closest edge
10. If you mess up, you can peel it off right away with no hassle, and add some heat to get rid of the wrinkles.
11. For Best application, use water underneath and squeegee out the water once desired placement is met