2022+ Subaru WRX Fog Light Bezel Surround Pin-Stripe Pre-Cut Overlay

• Fitment: For 2022-2024 Subaru WRX Front Bumper Fog Light Surround Bezel
• High Quality Material: Can withstand all kinds of weather (5 - 7 Year Durability)
• Air Release, Scratch Resistance
• Easy Application
• Comes in Pair (left and Right Foglight Surround Bezel Pin-Stripe
• ** NOTE ** Note actual surround replacement, this is a overlay vinyl that sticks onto the fog surround.

How to Install

For Best Results

Tools: Heat Gun or Blow Dyer / Padded Glove or Felt Tip Squeegee

Heat Gun or Blow Dyer / Padded Glove or Felt Tip Squeegee

1. Rinse / Soap your fog light surround. MAKE SURE there is no DUST or DEBRIS prior to install.
2. Best to cut around each Overlay for an easier install.
3. Peel each overlay off with the transfer tape and align at one of the pointy edges first.
4. Align the longer portion of the Fog Light Pin-stripe, first, at the corner where the surround and middle of the bumper meet.
5. Make sure you have a padded card or soft glove to put on your fingers to begin applying the overlay on the light. If not, your fingers will work.
6. Once laid to desire placement, make sure you have the overlay stuck onto the fog light surround securely before peeling off transfer tape (PEEL TRANSFER TAPE SLOWLY) to avoid lifting.
7. If using your fingers, lay it on the edge closest to the middle bumper and swipe left and right gradually to reduce bubbles.
8. If you have a blow dryer or heat gun, use it to get rid of any tiny bubbles and improve adhesion
9. If there are bubbles make sure you press firmly with your finger and swipe it toward the closest edge
10. If you mess up, you can peel it off right away with no hassle and add some heat to get rid of the wrinkles.
11. For Best application, use water underneath and squeegee out the water once desired placement is met (but not required).