2022+ Subaru WRX Black Out Top Outer Tail Light Brake Light Pre-Cut Overlay V2

• Fitment: For 2022-2024 Subaru WRX Outer Tail light Break Light Overlay Black Out
• High-Quality Material: Can withstand all kinds of weather (5 - 7 Year Durability)
• Made with Durable High Gloss Material with Nano Air-Release topped with Embossed PET Liner 
• Black Out Tint Vinyl Sticker, Changes the Rear of Vehicle to a More Aggressive Look
• Easy Application (Peel and Stick)
• Comes in Pair (left and Right SMOKE OUT)
• ** NOTE ** Not Actual Tail LIght Replacement, This product is an overlay that covers the existing Tail Light

How to Install

For Best Results

Tools: Heat Gun or Blow Dyer / Padded Glove or Felt Tip Squeegee

1. Rinse / Soap your Tail Light Break Light to get rid of debris prior to application
2. Peel off Tail Light Tint Overlay
3. Align the outer curve with the outer part of the red portion of the tail light. (Top corner curve, make sure it covers or aligned exactly at point) Starting from the topmost left side of the Driver Side or topmost right of the Passenger Side.
4. Make sure you have a padded card or soft glove to put on your fingers to begin applying the overlay on the light. If not, your fingers will work
5. If using your fingers, start from the left to right on Driver's Side and Vice Versa for the Passenger side. Make your way towards the middle of the bumper or vice versa. Swipe left and right gradually to reduce bubbles.
6. DO NOT LAY EVERYTHING AT ONCE (Lay the corner top curve first and work your way towards the middle of the car)
7. If you have a blow dryer or heat gun, use it to get rid of any tiny bubbles and improve adhesion
8. If there are bubbles make sure you press firmly with your finger and swipe it towards the closest edge
9. If you mess up, you can peel it off right away with no hassle, and add some heat to get rid of the wrinkles.
10. REMEMBER TO POST-HEAT the vinyl after laying, this will activate the glue behind the overlay which will enhance tackiness.