Side Mirror Turn Signal Tint with Pin-stripe Chrome Delete Pre-cut Overlay compatible with 2019-2025 Toyota RAV4

Transform your 2019-2025 Toyota RAV4 side mirrors with our risk-taking side mirror turn signal tint and pin-stripe chrome delete pre-cut overlay! Say goodbye to bland chrome and choose a custom color to give your turn signal a bold new look. Not only will your side mirror appear flawless, but the vibrant tint will also enhance your turn signal blinker. Make a bold statement and elevate your car's appearance with this simple yet powerful upgrade!

Specifications:

• Fitment: For 2019-2025 Toyota Rav4 Side Mirror Turn Signal Tint with Pin-stripe Chrome Delete Pre-cut Overlay
• PICTURE FEATURES: Gloss Black chrome delete with JDM Yellow Tint
• High-Quality Material: Can withstand all kinds of weather (5 - 7 Year Durability)
• Made with Durable High Gloss Material with Nano Air-Release
• Easy Application (Peel and Stick)
• Comes in (4 PCS) in a Pair (left and Right Chrome Delete and left and right Turn Signal Tint)
• ** NOTE ** Not Actual side mirror turn signal replacement. This product is an overlay vinyl that covers the existing turn signal and chrome on the side mirror.

How to Install

For Best Results

Tools: Heat Gun or Blow Dyer / Padded Glove or Felt Tip Squeegee

Step 1:

1. Rinse / Soap your side mirror chrome trim to get rid of debris before application
2. Peel off the Turn Signal tint overlay and align at the sharper edge that points toward the middle of the vehicle.
3. Once aligned, use your free hand to guide the rest of the overlay onto the turn signal. 
4. Lay down the overlay that covers the "BLINKER" light only.
5. Once aligned, post-heat with a heat gun to ensure the tint is stuck on and the glue is activated.

Step 2:

1. Next Peel off the side mirror pin-stripe overlays
2. Note: If you mess up placement, peel off the overlay easily. DO NOT heat up the overlay until you have met the desired placement.
3. Align the edge of the overlay that points TOWARD the middle of the car. 
4. First, lay the flat portion until the chrome trim splits into 2 different sections.
5. Lay either the top portion of the chrome trim or the bottom portion first.
   1. Take caution that the tails of the chrome delete will overlap the TINT in "STEP 1" of the TURN SIGNAL BLINKER by a cm or less on the top and bottom of the tint.
   2. This will help lock in the tint and making it more seamless.
6. If starting from the top portion, use your free hand to guide where the top tail lays. It should be just below the black gloss cap and just above the chrome inside the turn signal housing.
7. Do not lay both at the same time as air needs to escape one side as the other one is being laid.
8. Next, lay the other portion of the overlay and pull it with a tiny of bit force. This will allow you to guide the placement of the second portion of the overlay.
9. Lay down slowly and push out any bubbles as you lay it flat.
10. This may take some time, however, if you mess up, lift up the overlay and add some heat until the wrinkle disappears. Then re-apply to the desired placement.
11. Once all sections of the overlay is laid, depending on how you adjusted or pulled the piece, you may have some extra vinyl hanging that sticks onto the black gloss cap at the end of the chrome trim piece.
12. You will need to wrap it into the crevice of the turn signal housing with the gloss black mirror cap, or you can use a thin blade and cut off the excess.
    
13. Please see the product photo for the exact placement of the side mirror pin-stripe overlay.
14. Once placement is met, PLEASE FOLLOW THE INSTRUCTIONS FOR ADHESION.
15. If you have a blow dryer or heat gun, use it to get rid of any tiny bubbles and improve adhesion.
16. If there are bubbles make sure you press firmly with your finger and swipe it toward the closest edge
17. If you mess up, you can peel it off right away with no hassle, and add some heat to get rid of the wrinkles.
18. ** REMEMBER TO POST-HEAT** the vinyl after laying, this will activate the glue behind the overlay which will enhance tackiness.