Side Mirror Turn Signal Pin-stripe Chrome Delete Pre-cut Overlay compatible with 2019-2025 Toyota RAV4

Revamp your 2019-2025 Toyota RAV4 side mirrors with our effortless pin-stripe chrome delete pre-cut overlay! Rid the chrome to make your side mirror a seamless and aggressive appearance. Ditch the boring chrome and select from an array of unique hues to make your car stand out. This overlay also helps accentuate the turn signal blinker! Dare to make a fearless statement with this easy and impactful enhancement!

Specifications:

• Fitment: For 2019-2025 Toyota Rav4 Side Mirror Turn Signal Pin-stripe Chrome Delete Pre-cut Overlay Reflector Smoked
• PICTURE FEATURES: Gloss Black
• High-Quality Material: Can withstand all kinds of weather (5 - 7 Year Durability)
• Made with Durable High Gloss Material with Nano Air-Release
• Easy Application (Peel and Stick)
• Comes in (2 PCS) in a Pair (left and Right Chrome Delete)
• ** NOTE ** Not Actual side mirror turn signal replacement. This product is an overlay vinyl that covers the existing turn signal chrome on the side mirror.

How to Install

For Best Results

Tools: Heat Gun or Blow Dyer / Padded Glove or Felt Tip Squeegee

1. Rinse / Soap your side mirror chrome trim to get rid of debris before application
2. Peel off side mirror pin-stripe overlays
3. Note: If you mess up placement, peel off the overlay easily. DO NOT heat up the overlay until you have met the desired placement.
4. Align the edge of the overlay that points TOWARD the middle of the car. 
5. First, lay the flat portion until the chrome trim splits into 2 different sections.
6. Lay either the top portion of the chrome trim or the bottom portion first.
7. If starting from the top portion, use your free hand to guide where the top tail lays. It should be just below the black gloss cap and just above the chrome inside the turn signal housing.
8. Do not lay both at the same time as air needs to escape one side as the other one is being laid.
9. Next, lay the other portion of the overlay and pull it with a tiny of bit force. This will allow you to guide the placement of the second portion of the overlay.
10. Lay down slowly and push out any bubbles as you lay it flat.
11. This may take some time, however, if you mess up, lift up the overlay and add some heat until the wrinkle disappears. Then re-apply to the desired placement.
12. Once all sections of the overlay is laid, depending on how you adjusted or pulled the piece, you may have some extra vinyl hanging that sticks onto the black gloss cap at the end of the chrome trim piece.
13. You will need to wrap it into the crevice of the turn signal housing with the gloss black mirror cap, or you can use a thin blade and cut off the excess.
    
14. Please see the product photo for the exact placement of the side mirror pin-stripe overlay.
15. Once placement is met, PLEASE FOLLOW THE INSTRUCTIONS FOR ADHESION.
16. If you have a blow dryer or heat gun, use it to get rid of any tiny bubbles and improve adhesion.
17. If there are bubbles make sure you press firmly with your finger and swipe it toward the closest edge
18. If you mess up, you can peel it off right away with no hassle, and add some heat to get rid of the wrinkles.
19. ** REMEMBER TO POST-HEAT** the vinyl after laying, this will activate the glue behind the overlay which will enhance tackiness.