Rear Bumper Reflector Tint Pre-cut Overlay compatible with 2023+ Honda Accord 11th Gen

Transform the look of your vehicle with our Rear Bumper Reflector Pre-Cut Overlay tint for the 11th Gen 2023+ Honda Accord. Choose from Dark Smoke, Light Smoke, Matte Black, or Gloss Black to add an edge to your rear bumper. Embrace the dare and make a bold statement with our range of captivating finishes. Match the sleek matte black or glossy black of your rear bumper.

Specifications:

• Fitment: For 2023 2024 2025 Honda Accord LE, SE, Sport, Hybrid, and Touring models Rear Bumper Reflector Smoked
• High-Quality Material: Can withstand all kinds of weather (5 - 7 Year Durability)
• Made with Durable High Gloss Material with Nano Air-Release
• Easy Application (Peel and Stick)
• Comes in (2 PCS) in a Pair (left and Right SMOKE OUT)
• ** NOTE ** Not Actual Reflector Replacement. This product is an overlay that covers the existing rear bumper reflector with a vinyl tint.

How to Install

For Best Results

Tools: Heat Gun or Blow Dryer / Padded Glove or Felt Tip Squeegee

1. Rinse / Soap your Reflector to get rid of debris before application
2. Peel off one piece of the reflector tint at a time.
3. Note: If you mess up placement, peel off the overlay with ease. DO NOT heat up the overlay until desired placement has been met.
4. Whichever piece you decide to peel and stick on first, align the edge that is closest to the outside of the bumper pointing away from the middle of the bumper, and work your way inward toward the middle of the bumper.
5. Depending on how you install the overlay, there may be some extra hang from the overlay off the edge of the reflector -  wrapping into the reflector grooves may be required.
6. Once aligned at the pointed edge that points away from the middle of the bumper the rest should fall into place, but adjustments might be needed till the desired placement is met.
7. Best practice is to tack down one edge of the overlay and use your free hand to guide the rest of the overlay by matching the edge of the top of the reflector tint to the reflector or slightly above the reflector, ensuring all edges are covered by the tint.
8. As you guide the overlay, use your other free hand to lay and swipe the overlay onto the reflector, by pushing out any bubbles towards the closest edge.
9. Once laid the rest of the overlay should fall into place.
   
10. Once the placement is met, PLEASE FOLLOW THE BELOW INSTRUCTIONS FOR ADHESION
11. If you have a blow dryer or heat gun, use it to get rid of any tiny bubbles and improve adhesion
12. If there are bubbles, make sure you press firmly with your finger and swipe it toward the closest edge
13. If you mess up, you can peel it off right away with no hassle, and add some heat to get rid of the wrinkles.
14. ** REMEMBER TO POST-HEAT** the vinyl after laying, this will activate the glue behind the overlay which will enhance tackiness.
15. NOTE:  Gloss Black has PET liner, which must be peeled off after install for a complete super gloss finish.