Headlight DRL Daytime Running Lights Pre-cut Overlay Tint and Amber Delete compatible with 2026+ Nissan Sentra

Replace those bland factory 2026+ Nissan Sentra Daytime Running Lights stock color with a custom DRL overlay tint that matches your style. Choose from 10 vibrant color options; each designed to make your 2026+ Nissan Sentra impossible to ignore. Installation is straightforward: line up the pre-cut overlay and apply. The result? An aggressive, head-turning front end that commands attention on every drive. Transform your Sentra's look with a single upgrade that delivers serious visual impact.

🔧 Specifications:

• Fitment: For 2026+ Nissan Sentra S, Sentra SV, Sentra SR, Sentra SL
• High-Quality Material: Can withstand all kinds of weather (5 - 7 Year Durability)
  
• Easy Application (Peel and Stick)
  
• Comes in (4 Overlays (Driver and Passenger Sides) DRL and (Driver and Passenger Side) Amber Delete Tints
• ** NOTE ** Not a Headlight Amber or Daytime Running Light Replacement.
  This product is a vinyl overlay that sticks onto the existing headlight housing, which covers the amber from the outside, and a colored tint for your DRL's. Offering a vast range of colors to choose from that fit your personality.

🛠️ How to Install:

For Best Results, PROFESSIONAL INSTALL MAY BE REQUIRED! 
Tools Needed: Heat gun or blow dryer, padded glove or felt-tip squeegee (not required, but highly recommended)

Step-by-Step Installation:

1. Rinse the amber reflector headlight housing and white DRL surface area with soap and water, or spray with 70% isopropyl alcohol to remove all debris before application.

2. Dry the area before installation, removing all dust/debris for an easier install.

3. Begin with DRL Tint:
   1. Align the DRL tint to the headlight housing that is closest to the middle of the bumper.
      
      
   2. Once aligned, tack it down and use your freehand to guide the overlay across the DRL and into the DRL SLASHES.
      
      
   3. The DRL will sit just above the thin black line that surrounds the headlight, the curve that leads the DRL to the DRL SLASHES will match the inner curve of the DRL tint.
      
      
   4. As you guide the DRL, use a squeegee to smooth down the overlay little by little in a left-to-right motion - pushing the bubbles towards the nearest edge.
      
      
   5. As you move towards the DRL SLASHES, lay down the top portion that is closer to the AMBER, then adjust the slashes slightly to your desired placement. The DRL TINT should sit just before the black line that surrounds the headlight or slightly over. Ensure the DRL tint covers all the clear in the slashes for proper placement.
      
4. Start with Amber Delete Tint:

   1. Start with either the driver's-side or the passenger-side headlight. Peel off the overlay and align the top of the overlay with the top of the headlight that rounds into the Hood. The rectangular portion of the overlay will sit ontop of the headlight, and the triangle will cover the amber.

   2. Once the top portion of the headlight is laid and covered, the rest will wrap down towards the reflector, covering the amber.

   3. When you begin to lay the overlay on top of the reflector, ensure the edge of the overlay that sits towards the fender aligns with the edge of the headlight. This will provide a more proper placement.

   4. Use your free hand to guide the placement of the overlay as your other hand is smoothing down the vinyl up and down, inching closer to the rounded edge of the overlay that points inward toward the middle of the headlights.\
      

   5. Ensure the bottom of the headlight sits just after the amber by 1 cm to 2 cm, and the overlay should cover enough of the amber that it does not show at eye level. 
      
      
   6. It will also align with the DRL tint or slightly go over, ensuring a locked-in placement for both the tint and amber delete - seamless blacked out look.
      
      

5. Once everything is aligned, the rest should fall into place. Remember when applying the overlay, you can use your finger or a felt-tip squeegee in an up and down motion, pushing bubbles toward the nearest edge. Stretching may be required if you do not lay it on properly.
   

6. Post-heat the vinyl: Use a heat gun or blow dryer to remove small bubbles and activate the adhesive for stronger bonding 

7. If bubbles remain, press firmly with your finger or squeegee and swipe them out toward the closest edge.

8. If you make a mistake, gently peel off the overlay right away and reapply. Add light heat to remove wrinkles.

9. Important: Light Smoke and Gloss Black overlays include a PET liner that must be removed after installation. Dark Smoke may also include a PET liner. If you are unsure, please contact us.

📌 Reminder: Always post-heat the vinyl after installation. This activates the glue and ensures maximum adhesion.

📩 Need Help?
Questions? Contact our support team at:
📧 sales@aeroflowdynamicsoverlays.com