Front Bumper Reflector Pre-cut Overlay Tint for 2023-2025 Porsche 718 Cayman GT4 RS

Transform your 718 Cayman GT4 RS into a true head-turner. AFDOverlays aggressive front bumper reflector pre-cut overlay tint eliminates those factory amber reflectors and replaces them with a bold, menacing aesthetic that matches your car's performance pedigree. Choose from four distinct styles—each engineered to amplify your vehicle's already fierce presence. Pre-cut for a perfect fit and easy installation in minutes, this overlay delivers a premium front-end upgrade that commands attention on every road.

🔧 Specifications:

• Fitment: For 2023, 2024, 2025 Porsche 718 Cayman GT4 RS Front Bumper Reflector
• High-Quality Material: Can withstand all kinds of weather (5 - 7 Year Durability)
  
• Easy Application (Peel and Stick)
• Nano air-release technology for ease of installation - Black out and Matte Black
• Comes in (2 PCS) - driver side and passenger side front bumper reflector overlay tint.
• ** NOTE ** Not an actual front bumper reflector replacement. 
  This product is an overlay that covers and sticks onto the existing reflector surface.

🛠️How to Install:

For Best Results
Tools Needed: Heat gun or blow dryer, padded glove or felt-tip squeegee

Step-by-Step Installation:

1. Rinse the entire front bumper reflector with 70% isopropyl alcohol to remove all debris before application.

2. Dry the front bumper reflector completely to ensure there is no dust or residue left in the surface or in the crevices.

3. Begin either on the Driver Side or Passenger Side front bumper reflector. Align the pointier edge that points towards the front of the bumper. Ensure the overlay goes slightly passed the reflector by half a cm as it will need to wrap around the edges for full coverage. There will be some overlay hanging on the top of the reflector as it needs to wrap above the reflector for full coverage. As long as the overlay appears to cover the top of the reflector by aligning it to the groove where the bumper meets the reflector, it should be the correct placement.
   

4. Once you have aligned the overlay at either edge, the rest will fall into place. If it does not, you can guide the overlay slowly by laying it and matching the edges of the reflector till the orange is covered entirely. 

5. Best practice is to start by laying down the flat portion first — this is the section that faces you directly. Once the flat surface is fully applied to the reflector, leave the remaining overlay hanging for last. This makes alignment easier and helps ensure a smooth, wrinkle-free finish when wrapping the rest of the overlay.
   
   
6. After applying the flat portion of the overlay, you’ll notice some excess vinyl that needs to wrap into the wheel well — specifically, the section of the front bumper reflector that’s visible inside the front wheel area. Gently pull the overlay so it wraps over and covers the orange amber section inside the wheel well, then lay it flat. The overlay should end right at the edge of the orange amber or slightly overlap it.
   
7. You’ll also see a pre-cut slit on both the top and bottom of the reflector overlay within the wheel well section. These slits are designed to help the vinyl conform more easily — allowing you to lay the inside portion flat first, then fold and secure the remaining section over the top of the wheel well edge for a tighter, cleaner wrap.
   

8. Begin applying the overlay by using your finger or a felt-tip squeegee in a left-to-right motion, moving downward as you are pushing bubbles toward the nearest edge.

9. Once the flat portion is applied, use your fingernail or a felt-tip squeegee to gently press and smooth the remaining overlay onto the sides of the reflector. You can also use a heat gun or blow dryer to warm the vinyl slightly — this helps it soften and conform more easily to the surface. As it becomes more flexible, continue smoothing the overlay around the sides of the reflector to achieve full coverage. Pay extra attention to rounded areas, applying gentle pressure toward the inside of the reflector to ensure a clean, secure wrap.
   
   

10. Continue laying the overlay till it is smoothed down on all parts of the flat surface until the desired placement has been met. (REFER TO PRODUCT PICTURES FOR ACCURATE PLACEMENT)
    

11. Once everything is laid to your desired outcome, follow the steps below to ensure longevity and adhesion.

12. Post-heat the vinyl: Use a heat gun or blow dryer to remove small bubbles and activate the adhesive for stronger bonding.

13. If bubbles remain, press firmly with your finger or squeegee and swipe them out toward the closest edge.

14. If you make a mistake, gently peel off the overlay right away and reapply. Add light heat to remove wrinkles.

15. Important: Gloss Black overlays include a PET liner that must be removed after installation. 

📌 Reminder: Always post-heat the vinyl after installation. This activates the glue and ensures maximum adhesion. 

📩 Need Help?
Questions? Contact our support team at:
📧 sales@aeroflowdynamicsoverlays.com