AFD Overlays Front Emblem H Logo Pre-Cut Overlay compatible with 2024+ Sonata

AFD Overlays Front Emblem H Logo Pre-Cut Overlay compatible with 2024+ Sonata

Upgrade your Sonata with the 2024+ Pre-Cut Front Emblem Overlay! Swap out the standard silver for a personalized color of your choice. Effortlessly create a customized look for your car while adding a touch of personalization to your vehicle.

• Fitment: For 2024+ Sonata H Logo Front Overlay
• High Quality Material: Can withstand all kinds of weather (5 - 7 Year Durability)
• Offered in many colors
• Easy Application, Peel and Stick.
• Comes in Pair (Front and Rear Emblem Overlay)
• H Logo overlay featured in the Picture is GLOSS BLACK
  
• NOTE  This is an emblem vinyl overlay that sticks onto the existing emblem. NOT an actual replacement.

How to Install

For Best Results

Tools: Heat Gun or Blow Dyer / Padded Glove or Felt Tip Squeegee

1. Rinse / Soap your Sonata H Emblem to get rid of debris before application
2. Peel off the H Logo.
3. Each H Logo is made slightly larger so it will wrap around the edges of the emblem.
4. Align the emblem to where you would like the H to line up, lay the flat pieces onto the flat portion of the symbol and smooth it out prior to removing the transfer tape.
5. Make sure the flat surfaces of the emblem are covered with extra 'slack' (meaning extra vinyl over each edge).
6. Once laid you can use your finger to push down the excess and wrap it over the edges. It is best to heat up the overlay so the edges that are not fully adhered yet become more flexible due to the heat.
7. Make sure you have a padded card or soft glove to put on your fingers, because once you lay it on the logo you would need to squeegee it on or use your fingers to push it into the crevices around and inside the H emblem.
8. Swipe left and right gradually to reduce bubbles
9. If you have a blow dryer or heat gun, use it to get rid of any tiny bubbles and improve adhesion
10. If there are bubbles make sure you press firmly with your finger and swipe it toward the closest edge
11. If you mess up, you can peel it off right away, but slowly, then add some heat to get rid of the wrinkles.
12. For the Best application, use water underneath and squeegee out the water once the desired placement is met. (This Method only works if the backing has Oracle on it)