{"product_id":"headlight-amber-delete-pre-cut-overlay-tint-for-2023-2027-pilot","title":"Headlight Amber Delete Pre-cut Overlay Tint for 2023-2027 PIlot","description":"\u003cp\u003eTransform your 2023-2027 Pilot's front end with the AFDOverlays Headlight Amber Delete Pre-cut Overlay. This precision-engineered tint instantly gives your headlights a sleek, aggressive appearance while maintaining optimal visibility. Choose from three distinct tint options to match your style perfectly. Installation takes just minutes. No cutting, no guesswork. Achieve a cohesive, modern look that sets your vehicle apart from the road.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFitment: For 2023, 2024, 2025, 2026, 2027 Honda Pilot Headlight Amber Reflector\u003c\/li\u003e\n\u003cli\u003eHigh-Quality Material: Can withstand all kinds of weather (5 - 7 Year Durability)\u003c\/li\u003e\n\u003cli\u003eMade with Durable High-Gloss Material\u003c\/li\u003e\n\u003cli\u003eNano-air release technology for easy dry Application (Peel and Stick)\u003c\/li\u003e\n\u003cli\u003eComes in (2 PCS) \u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e2 x Amber Delete ( Driver Amber + Passenger Amber )\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e** NOTE ** Not Actual Headlight Amber Reflector Replacement\u003c\/strong\u003e, this product is an overlay vinyl tint that tints both headlight amber reflectors by sticking onto the headlight housing's specific amber area.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Install 2023-2027 Honda Pilot Amber Delete:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor Best Results\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eTools Needed:\u003c\/strong\u003e Heat gun or blow dryer, padded glove or felt-tip squeegee\u003cbr\u003e\u003cstrong\u003eInstall Level:\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"PDq2pG_selectionAnchorContainer\"\u003e\u003cstrong\u003eStep-by-Step Installation:\u003c\/strong\u003e\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the Headlight\u003c\/strong\u003e\u003cbr\u003eRinse the headlight with soap and water or clean the entire surface with 70% isopropyl alcohol to remove any dirt, dust, oils, or debris.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry the Surface Completely\u003c\/strong\u003e\u003cbr\u003eWipe the headlight completely dry. Make sure there is no moisture, dust, lint, or loose fibers remaining on the surface or around the edges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePeel \u0026amp; Position the Amber Delete\u003c\/strong\u003e\n\u003col\u003e\n\u003cli\u003eCarefully peel the Amber Delete from its backing paper.\u003c\/li\u003e\n\u003cli\u003eStart by aligning the \u003cstrong\u003etop edge\u003c\/strong\u003e of the Amber Delete just underneath the factory black outline surrounding the headlight. The overlay should sit on the \u003cstrong\u003eclear portion of the headlight\u003c\/strong\u003e, NOT on top of the black outline or side black outline. Use the inner black outline (line next to clear) as your placement guide.\u003c\/li\u003e\n\u003cli\u003eOnce the top edge is properly aligned, gently lay the rest of the overlay onto the headlight. \u003cstrong\u003eDo not stretch the vinyl.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCheck the amber section from multiple viewing angles. The overlay should cover nearly all of the amber. A very small amount may still be visible when looking directly at the headlight from the front.\u003c\/li\u003e\n\u003cli\u003eAt the bottom of the headlight, the \u003cstrong\u003epointed end of the Amber Delete should sit nearly parallel with the beginning of the DRL.\u003c\/strong\u003e Use this as another guide to confirm proper placement.\u003c\/li\u003e\n\u003cli\u003eOnce everything is aligned, gently smooth the overlay down from the center outward. If you see a small air bubble, firmly push it toward the nearest edge until the air escapes.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjust the Placement if Needed\u003c\/strong\u003e\u003cbr\u003eIf the placement does not look correct, carefully peel the overlay back and reposition it. \u003cstrong\u003eDO NOT apply heat until you are satisfied with the placement.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmooth the Entire Overlay\u003c\/strong\u003e\u003cbr\u003eOnce the placement is correct, firmly smooth down the entire overlay, working from the center toward the outer edges. Make sure there are no remaining bubbles, wrinkles, or lifted areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck All Edges\u003c\/strong\u003e\u003cbr\u003eGo around the entire Amber Delete and make sure every edge is making full contact with the headlight. Pay extra attention to corners and pointed areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemove Small Bubbles if Needed\u003c\/strong\u003e\u003cbr\u003eFor any remaining small bubbles, use your finger or felt-tip squeegee to firmly push the air toward the closest edge. A small amount of gentle heat can help the vinyl conform if necessary.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrect Any Wrinkles Before Final Heating\u003c\/strong\u003e\u003cbr\u003eIf a wrinkle forms, carefully lift that section of the overlay. Apply a small amount of heat to relax the vinyl, allow it to cool slightly, and then gently lay it back down \u003cstrong\u003ewithout stretching or pulling it.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinal Placement Check\u003c\/strong\u003e\u003cbr\u003eBefore post-heating, check the overlay from several angles one final time. Make sure the amber is properly covered and the overlay is sitting in the correct position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePOST-HEAT THE OVERLAY\u003c\/strong\u003e\u003cbr\u003eOnce you are completely satisfied with the installation, use a heat gun or blow dryer to evenly warm the entire overlay, especially around the edges and corners. The vinyl should become \u003cstrong\u003ehot\/warm to the touch, but never scalding.\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e📌 \u003cstrong\u003eReminder:\u003c\/strong\u003e Always \u003cstrong\u003epost-heat\u003c\/strong\u003e the vinyl after installation. This activates the glue and ensures maximum adhesion.\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e📩 \u003cstrong\u003eNeed Help?\u003c\/strong\u003e\u003cbr\u003eQuestions? Contact our support team at:\u003cbr\u003e📧 \u003ca rel=\"noopener\" class=\"decorated-link cursor-pointer\"\u003esales@aeroflowdynamicsoverlays.com\u003c\/a\u003e\u003c\/p\u003e","brand":"AeroFlowDynamics Overlays","offers":[{"title":"Dark Smoke","offer_id":45371129659507,"sku":"AFDO-23PILOT-AMBRDEL-1","price":26.0,"currency_code":"CAD","in_stock":true},{"title":"Light Smoke","offer_id":45371129692275,"sku":"AFDO-23PILOT-AMBRDEL-2","price":26.0,"currency_code":"CAD","in_stock":true},{"title":"Black Out","offer_id":45371129725043,"sku":"AFDO-23PILOT-AMBRDEL-3","price":26.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2276\/6841\/files\/PilotHeadlightAmberDarkSmoke.jpg?v=1787016841","url":"https:\/\/aeroflowdynamicsoverlays.com\/en-ca\/products\/headlight-amber-delete-pre-cut-overlay-tint-for-2023-2027-pilot","provider":"AeroFlowDynamics Overlays","version":"1.0","type":"link"}